免费领取现金红包20元MTP cables are your best choice for high density fiber networks. It′s specifically designed for fast ethernet, fiber channel, data center and gigabit ethernet applications. This 8 Fiber harness cable is used for a direct connection between QSFP+ to (4) SFP+ ports with no patch panels or intermediate trunks in between. This LSZH cable is designed and tested to conform to IEC-60332-1 and IEC-61034.
Please Note: MTP is a registered trademark of US Conec Ltd. Attenuation testing performed in accordance with EIA/TIA-455-171A
MTP 0.35dB IL, LC 0.2dB IL; 2.0mm fan-out diameter & 0.5m breakout length, 3.0mm Plenum (OFNP) cable jacket, the MTP breakout cable is designed for 40G QSFP+ PLR4 optics interconnect solution and high-density data center application
|
|
Features
l US Conec MTP? connector, Senko MPO Plus premium connector
l OS2, OM3, OM4 fiber grades (OM1 and OM2 available)
l 0.35dB Elite low loss MTP/MPO connector as well standard versions of 0.6/0.75dB
l Factory terminated and tested
l Allow easy migration from 10GbE to 40GbE or 100GbE
l Pulling eyes are provided as an option to protect the fiber ends during installation
Specifications
|
Parameters |
Unit |
Values |
|
Fiber Mode |
- |
OS2 SMF 9/125μm |
|
MTP Connector IL |
dB |
0.35dB Max(0.15dB Typ.) |
|
MTP Connector RL |
dB |
≥60 |
|
Attenuation at 1310nm |
dB/km |
≤0.32 |
|
Jacket OD |
mm |
3.0 |
|
Installation Tensile Load |
N |
100 |
|
Cable Jacket |
- |
LSZH |
|
Operating Temperature |
°C |
-10 ~ +70 |
|
Wavelength |
nm |
1310/1550 |
|
LC Connector IL |
dB |
≤0.2 |
|
LC Connector RL |
dB |
≥50 |
|
Attenuation at 1300nm |
dB/km |
≤0.18 |
|
Fan-Out Diameter |
mm |
2.0 |
|
Long-Term Tensile Load |
N |
50 |
|
Fiber Count |
|
8 Fibers |
|
Storage Temperature |
℃ |
-40 ~ +85 |
Copyright ? 2009-2016 HTFuture All Rights Reserved.
